DOVETAIL ACCESSORIES

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. With a choice of sizes, accessories and attachments, you can truly Make It Your Own.

Adding, removing and repositioning accessories and roof loads is quick and simple with the BASE Rack’s dovetail system, making it easier to install and remove individual items without disturbing any other cargo or lashing points.

A REVOLUTION IN ROOF RACK ATTACHMENTS

Make It Your Own

UNIQUE DOVETAIL EXTRUSION

The dovetail extrusion extends around both the BASE Rack’s full perimeter and along each edge of the internal beams provides endless mounting and attachment options.

Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won’t collect dust and debris. Each BASE accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.

ACCESSORY OPTIONS

LIGHT BARS

WIND DEFLECTOR

AWNING BRACKETS

HI-LIFT JACK HOLDERS

RECOVERY BOARD HOLDER

ROLLER KIT

GAS BOTTLE HOLDER

JERRY CAN HOLDERS

SPARE WHEEL Y-STRAP

RATCHET STRAPS

TIE-DOWNS

T-SLOT ADAPTOR

ROOF RACK LIGHT BAR

Complementing the sleek design and mounting system of the BASE rack, the ARB Roof Rack Light Bar utilizes the simple mounting system, of the BAR Rack allowing it to be quickly and easily setup.

Sitting at 36″ wide, the mounting system allows for the light bar to be installed either in front of the rack or nicely tucked up underneath

FEATURES

  • Unique reflector design provides optimum distance and width for highway driving
  • Reflector design limits light being reflected off the vehicle hood and bar work
  • Combo beam technology provides excellent mid-to long-range spread as well as distance down the road
  • Virtually indestructible polycarbonate lens
  • Extruded aluminum body with stealth black powdercoat finish
  • Unique multi-position mounts suitable for BASE Rack, as well as ARB trade and touring racks
  • Brackets included provide two mounting options dependent on the roof rack
  • 304 stainless hardware
  • Reverse polarity protection
  • Breather with pressure-tested seal
  • Vibration and UV tested
  • Thermal management
  • Dust and waterproof to IP68
  • Over and under voltage protection
  • Protected against radio frequency (RFI) and electromagnetic (EMC) interference
  • Two-pin, over-moulded, waterproof plug
  • Suitable for use with ARB driving light loom – 3500810 & 3500820
  • R10, CE and ROHS certified
  • Three-year warranty
Read More
ROOF RACK LIGHT BAR SPECIFICATIONS

Roof Rack Light Bar Kit includes:

  • 1 x 36″ light bar
  • 2 x Bracket for below rack mounting
  • 2 x Bracket for front rack mounting
  • 1 x Bracket mounting hardware

Light Bar Lens Cover also available:

  • Contains two covers x 22.8cm (9.0″)
  • Virtually indestructible polycarbonate cover
  • Clear hard-coated finish
  • UV stable
  • Specifically designed to suit the ARB roof rack light bar
  • Available in clear, solid black and amber

WIND DEFLECTOR

No longer will there be the fear of additional cabin noise when fitting a roof rack. ARB’s engineers have formed an underside mounting wind deflector, ensuring a quiet and enjoyable driving experience.

FEATURES

  • 1.6mm press-formed aluminium
  • Press-form shape provides rigidity and strength and aids noise reduction (if you want fancy technical words: it works to reduce vortex shedding effects)
  • Durable powder-coat finish
  • Vehicle specific
  • Pre-cut slots to aid fitment of front-mounted roof rack light bar
  • Significantly reduces wind noise associated with roof racks (almost eliminates it on most vehicles)
Read More

AWNING BRACKET

Mount your ARB awning securely. The Awning Bracket allows quick fitment of your awning – meaning you spend less time at home packing and prepping and more time at your destination enjoying the great outdoors!

FEATURES

  • Allows fitment of ARB’s awning range
  • Easy to attach to the BASE Rack – simply secure onto the dovetail track on the rack
  • Can attach to the dovetail track at any point on the rack
  • Height adjustable
  • Made from strong, powder-coated steel
Read More

HI-LIFT JACK HOLDERS

An off road jack is a 4WDer’s best friend. When you’re out on the tracks you want easy access to your jack and the Hi-Lift™ Jack holder ensures your jack is always at hand. Available in both Classic for simple jack attachment and Premium for quick release and added security. *Premium version pictured.

PREMIUM

The Premium jack holder incorporates two hinged cradles which secure the jack to the rack and can be opened while the jack is resting inside. It also incorporates provisions for a padlock to secure the jack to your vehicle. Just like the Classic, the Premium jack holder can be mounted in either the foot up or foot down position.

PREMIUM HOLDER FEATURES
  • Allows easy fitment of a Hi-Lift Jack™ to your BASE Rack
  • Can attach to the dovetail track anywhere on the perimeter
  • Made from strong, powder-coated steel
  • Padlock provision for added security
  • Quick-release loading and unloading of jack
Read More

CLASSIC JACK HOLDER

The Classic jack holder keeps the jack secure with two eye bolts attached directly to the dovetail and allows the jack to be mounted in either the foot up or foot down position.

CLASSIC HOLDER FEATURES
  • Allows easy fitment of a Hi-Lift Jack™ to your BASE Rack
  • Can attach to the dovetail track anywhere on the perimeter
  • Made from strong, corrosion-resistant steel
  • Includes rubber handle keeper
Read More

RECOVERY TRACK HOLDER

When you’re stuck in the sand, you want to be able to access your recovery tracks quickly so you can get on with your adventure. The Recovery Track Holder is a 4 piece fastening kit which is equally suitable for use with TRED Pro and MaxTrax mounting systems.

FEATURES

  • Allows easy fitment of recovery tracks onto the BASE Rack
  • Can attach to the dovetail track at any point on the rack
  • Made from strong, corrosion-resistant steel
  • To be used with track manufacturer’s mounting hardware
  • Suitable for use with ARB TRED Pros and MaxTrax (product specific mounting hardware sold separately)
Read More

ROLLER KIT

Loading long pieces of timber and other heavy items can be tricky when you’re alone, but adding a roller to the end of your BASE Rack will alleviate this. The roller helps your equipment to glide onto the rack ready for you to secure and get on your way.

Available in two sizes to suit the standard and narrow racks, the Roller Kit is made from steel and can be attached to any section of the dovetail around the outer perimeter of the rack.

FEATURES

  • Allows easy loading onto your BASE Rack
  • Can attach to the dovetail track anywhere on the perimeter
  • Made from powder-coated aluminium
  • Makes long, heavy items easy to load safely onto the roof rack
  • Full-width, low-profile roller

AVAILABLE SIZES SUIT

  • 1155mm wide rack
  • 1285mm wide rack
Read More

GAS BOTTLE HOLDER

Keeping a gas bottle safe and secure is a must when traveling. Attaching and removing your gas bottle is a breeze with the gas bottle holder. It’s perfect for carrying a 2 kg up to a 9 kg gas bottle, comes complete with the base, ratchet strap and two fixing eye bolts and can be secured to an individual beam or span between beams.

FEATURES

  • Allows easy fitment of a gas bottle to your BASE Rack
  • Suits gas bottles between 2 kg  – 9 kg
  • Secures to an individual beam or spans between beams
  • Eye bolts and strap included to secure the gas bottle
  • Durable baseplate with adjustable stainless steel locking bracket
  • Solid aluminum clamps and forged steel eye nuts
  • Can attach to the dovetail track at any point on the rack
  • Made from strong, powder-coated steel
Read More

JERRY CAN HOLDER

It’s often essential to carry extra fuel or water on an off-road trip. Rest assured you can always be prepared with four jerry can holder sizes, perfect to suit your individual needs.

FEATURES

  • Allows easy fitment of two jerry cans to your BASE Rack
  • Horizontal or vertical mounting options available
  • Secures to two beams (double horizontal & double vertical styles)
  • Secures to an individual beam or spans between beam (single & single vertical styles)
  • Solid aluminum clamps with forged steel eye nuts, strap included
  • Can attach to the dovetail track at any point on the rack
  • Holder made from strong, powder-coated steel
  • Powder-coated steel support plate (single horizontal & single vertical styles)
  • Provision for water tap (double & single vertical holder styles)
Read More

AVAILABLE OPTIONS

DOUBLE HORIZONTAL

DOUBLE VERTICAL

SINGLE HORIZONTAL

SINGLE VERTICAL

SPARE WHEEL Y-STRAP

Securing a spare tire to your roof rack has never been so simple!

Secure your spare wheel on your BASE Rack with ease, ready to tackle your next adventure. These effective ratchet strap systems secure the tire in three points on the rack. One strap kit is available with conventional hooks and eye bolt mounts where the other uses a unique dovetail clip which offers a positive connection directly to the rack at all three points.

FEATURES

  • 25mm wide polyester webbing straps
  • For use with BASE Rack without the need for additional tie-down points
  • 440 lbs lashing capacity to AS/NZS4380:2001
  • Adjustable one inch straps suit most tire sizes
  • Supplied with carry bag
Read More

RATCHET STRAP (PAIR)

No need to struggle with a standard ratchet or cam-buckle strap when you begin to tighten it and find it’s no longer attached.

Ensure all your gear is safe and secure on your BASE Rack with these ratchet straps; easy to attach to the rack and will you peace of mind when carrying bulky items. These speciality dovetail straps form a positive connection from the moment you attach them to the rack to ensure they’re still attached when you get to tightening them.

FEATURES

  • 25mm x 3m polyester webbing
  • For use with BASE Rack without the need for additional tie-down points
  • 330 lbs lashing capacity to AS/NZS4380:2001
  • Set of two per pack
  • Supplied with carry bag
Read More

EYE BOLT TIE-DOWN (SET OF FOUR)

Secure your gear quickly and safely. From items such as timber and ladders to swags and camping gear, these eye bolt tie-downs are built tough to handle any load and terrain.

FEATURES

  • Provides a lashing point for ratchet straps
  • Design to stay securely on the BASE Rack when not in use
  • Can attach to the dovetail track at any point on the rack
  • Made from strong, powder-coated aluminium
  • Forged steel eye nuts
  • Set of four per pack
Read More

SPRING-LOADED TIE-DOWN (PAIR)

Quick-attach spring-loaded tie-downs are easy to use with a simple one-handed operation. Great for one-off needs and quick loading and unloading, these tie-downs twist on and twist off.

FEATURES

  • Quick attachment and release
  • Provides a lashing point for ratchet straps
  • Easy to attach to the roof rack
  • Designed to be taken off the rack when not in use by a simple half turn
  • Can attach to the dovetail track at any point on the rack
  • Made from strong stainless steel
  • Set of two per pack
Read More

T-SLOT ADAPTOR (SINGLE OR PAIR)

For the active outdoor adventurer. For use with your existing T-slot compatible accessories. From your bike carrier to your kayak holder, the T-slot adaptor bracket ensures you can easily attach anything to the BASE Rack.

FEATURES

  • Allows fitment of accessories from a range of roof rack manufacturers
  • Uses a standard T-slot channel to accept T-slot mounted accessories
  • Can attach to the dovetail track at any point on the rack
  • Available as single or pair
Read More
top